See the 'pencil" icon, this allows you to enter the password for the camera so that the NVR can connect to it. ( it doesnt change the password, it simply uses the pass already on the camera to allow the NVR to make contact) If you see an invalid username/pass message, edit the password here to match whats on the camera. Hi, I'm using Dahua NVR (NVR4104HS-P-4KS2/L) with 2 IP cameras (Dahua starlight 2MP and a 4MP). I'm using DMSS mobile app and experiencing issues of not able to see the streaming when I'm outside (Not all the time though). B Setup your Dahua's Camera to your LAView's NVR subnet with a IP currently not assigned to other Laview's IP camera. Understand you can't connect to the Dahua's IP Camera. Take it down, connect to your home network through a short span of network cable and then try to configure it. Presumably plugged in to a PoE port. In the NVR web GUI, camera Configuration, note down the IP address of the channel you'd like to plug the camera in to. And change the channel to 'Manual' from Plug and Play. Access the camera web GUI to change the camera IP address to match. To support the channel to purchase equipment (camera + microphone): paypal.me/zaginfoDVR NO DISPLAY||DVR OUT OF RANGE||DVR NO SIGNAL OUTPUT||DVR DISPLAY PROB 1) Go to the local webpage of your chinese cam and look up the firmware version. Or use the device manager from Xiongmai: 2) Go to this page --> Firmare download list and search for 14960 (or whatever you have). Dont mind all the rest of the text on the right of the number. .

dahua dvr not displaying